Description:
Developed on the basis of Automatic Packet
Reporting System, SainSonic AP510 is to share APRS data integration. Built-in
GPS antenna and VHF radio transceiver module to TNC codec comprehensive plan, it
gives the mobile ham a place to monitor for 10 to 30 minutes in any area, at any
time to capture what is happening in ham radio in the surrounding area.
When powered on, SainSonic AP510 will be decoded
to work with the standard orientation and, after verification, transmit its APRS
data. It’s compatible with common business APRS equipment and various Digipeater
and iGATE.
Functions:
Integrated Hardware: GPS module, antenna, MCU SCM
(Single-Chip Micro), VHF transceiver modules, built-in lithium battery, charger
IC, temperature sensor, TF card, buzzer, wireless Bluetooth module:
1. GPS Module
UBLOX 7 GPS module, high
sensitivity, fast positioning, less drifting, stable power.
2. GPS
Antenna
18mm * 18mm active GPS antenna, built-in LNA amplification, Star
Search, locate quickly.
3. AVR SCM
AVR Mega 64 SCM, stable and
reliable.
4. VHF Module (1W)
The latest 1W VHF transceiver modules,
tiny one, high stability for all types of wireless data transmission.
5.
VHF Antenna
VHF antennas are individually matched to send plants to ensure
that the standing wave emission and emission efficiency.
6. 3,300mAh
battery
Quality lithium batteries by IMAX B6 0.6A charge and discharge.
Standby 28-36 hours with the emission interval of about 20 seconds. Or it will
work up to 90 hours when on the low-power mode or a wider interval.
7.
Built-in Charge Management IC (Input 5V)
Built-in lithium red power
management IC, avoid battery overshoot and over-discharge, caring protect the
battery. Charge current <400ma -voltage="" 3.4v="" automatic="" is="" low="" lower="" operating="" p="" protection="" shutdown.="" than="" voltage="">
8. LED Status Display
(Charging and Transceiver LCD)
Dual LED display. Red is for charging. Green
is the GPS indicator: Flashing indicates that no location. If it’s on, it means
successful positioning.
9. Single Button (power switch and manual
transmit)
Turn on / off - Hold the button.
Manual Transmit - After
startup, short press it.
10. 18B20 Temperature Sensor (-40C ~ +99C)
IC
precision at 0.0625 degree.
It delivers the temperature inside the machine
in real time.
(Need to extract the temperature sensor out if to measure the
outside temperature)
11. Buzzer ( beep )
A starting-up and transmission
reminder, easy to know the working status.
12. TF Deck (to record
coordinates )
The following supports 4G TF card, FAT16 or FAT32 partition
format, the file name is automatically named according to the time saved in KML
format.
For example: at 18:20 on December 10, 2013 to start work
positioning.
File name: 12101820.KML (May Day midnight, Greenwich Mean
Time)
13. Bluetooth 2.0 Module (for Mobile Phone Connectivity
)
Built-in Bluetooth 2.0 module up to 4,800 bps, -80 dBm, sniff subrating for
low-energy, only 0.8mAh power-consumption goes as far as to 10 meter.
Specifications:
AP510 |
Specification |
GPS |
Built-in GPS module and antenna |
RF Module |
VHF Frequency Seting 1Watt |
RF Antenna |
Handset Booster Antenna |
Memory |
Support 4G TF card(optional) |
Thermometer |
18B20 Sensor |
MCU SCM |
Mega64 Industrial |
Output |
USB |
Bluetooth |
Bluetooth 2.0(9600bps) |
Buzzer |
Beeper(can be turned off) |
Decoding function |
Decoder chip of CML Inc. |
Battery Capacity |
2200 mAh |
Button |
One button of Power On/Off and TX |
Interface Extension |
PCB 3 Analog Interface |
LED |
Dual LED Indicator |
Package:
1 x AP510 APRS Tracker
1 x USB
Charging Cable
1 x 2.15 dBi High Gain Antenna
1 x User
Manual
400ma>